China Bx100 Three Phase Electric Scuba Diving Breathing 300bar Air Compressor 12v air compressor

Merchandise Description

BX100 3 Stage Electric Scuba Diving Respiratory 300bar Air Compressor 


Introduction

one.BX100 series high pressure air compressor is the smallest, lightest portable breathing air compressor in the whole industry.
two.The BX100 series only 45 KG, can easily put it in the trunk of the car , carry to use the site.
3.It can be used in fire, scuba diving, shooting , emergency rescue, chemical, oil field and other fields.
four.Convenient to move, easy operation, and the high pressure air compression manufacturing meet EN 12571 international breathing compressed air standard.
five.The oil and contaminants in the compressed air are removed by filters and  oil- moisture separators in the duration of compression,so the outlet air is pure and odorless.It is safe and reliable breathing air supply device.

Solution Composition:   
one.Optional gasoline motor, a few-stage, 4-phase-stage electric powered generate motor, V belt travel
2.4 cylinder level 4 high-pressure compressor
three.Specially treated alloy cylinder and pistons
4.Mounted in the four hundred bar substantial pressure on the compressor force gauge .
five.1.2 meters substantial force air tube, joints according to the demands of you
6.Higher temperature resistance plastic blowing steel frame
7.Manual stopping unit
8.Precision air-consumption filter
9.Higher-energy Stainless steel supporter cover
10.Two oil-drinking water separator, 2 drain valve (optional automated decontamination)
11.Activated carbon molecular sieve filtration method
12.Filter is produced by seamless aluminum alloy, outer can endure 550bar strain
thirteen.Terminal protection valve force stepless adjustment
fourteen.To set force automated stop, stop the reduction valve regular rev.Soar, make certain basic safety and security

Specification for Scuba Diving Respiration 300bar Air Compressor :
 

Product No BX100/ET BX100/EM BX100P BX100SH
 Flow Rate   100L/min   100L/min   100L/min   100L/min 
 Working Pressure   200/300Bar   200/300Bar   200/300Bar   200/300Bar 
 Safety Valve setting   330Bar   330Bar   330Bar   330Bar 
 Number of compression stage   4 
 Number of cylinder   4 
 Driven by   Three stage    Single Section    Three Stage
Solitary Phase 
 Petrol Engine 
 Voltage / Frequency   380V/fifty/60Hz   220V/50/60Hz   220V/fifty/60Hz
380V/fifty/60Hz 
 GX160 
 Power   2.2Kw   2.2Kw   2.2Kw   5.5PS 
 Noise    ≤85 dB   ≤85 dB   ≤85 dB   ≤85 dB 
 Speed   2800rpm/min   2800rpm/min   2800rpm/min   3600rpm/min 
 Dimension   600*390*400mm   680*370*400mm 
 Wight   45Kg   45Kg   47Kg   40Kg 
 Breathing air standard   EN12571   EN12571       EN12571 
 Configure   Standard   Standard   With PLC    Standard 

 

  

 

US $1,650-2,500
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Vertical
Structure Type: Semi-Closed Type
Compress Level: Multistage

###

Model No BX100/ET BX100/EM BX100P BX100SH
 Flow Rate   100L/min   100L/min   100L/min   100L/min 
 Working Pressure   200/300Bar   200/300Bar   200/300Bar   200/300Bar 
 Safety Valve setting   330Bar   330Bar   330Bar   330Bar 
 Number of compression stage   4 
 Number of cylinder   4 
 Driven by   Three phase    Single Phase    Three Phase
Single Phase 
 Petrol Engine 
 Voltage / Frequency   380V/50/60Hz   220V/50/60Hz   220V/50/60Hz
380V/50/60Hz 
 GX160 
 Power   2.2Kw   2.2Kw   2.2Kw   5.5PS 
 Noise    85 dB   85 dB   85 dB   85 dB 
 Speed   2800rpm/min   2800rpm/min   2800rpm/min   3600rpm/min 
 Dimension   600*390*400mm   680*370*400mm 
 Wight   45Kg   45Kg   47Kg   40Kg 
 Breathing air standard   EN12021   EN12021       EN12021 
 Configure   Standard   Standard   With PLC    Standard 

###

US $1,650-2,500
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Vertical
Structure Type: Semi-Closed Type
Compress Level: Multistage

###

Model No BX100/ET BX100/EM BX100P BX100SH
 Flow Rate   100L/min   100L/min   100L/min   100L/min 
 Working Pressure   200/300Bar   200/300Bar   200/300Bar   200/300Bar 
 Safety Valve setting   330Bar   330Bar   330Bar   330Bar 
 Number of compression stage   4 
 Number of cylinder   4 
 Driven by   Three phase    Single Phase    Three Phase
Single Phase 
 Petrol Engine 
 Voltage / Frequency   380V/50/60Hz   220V/50/60Hz   220V/50/60Hz
380V/50/60Hz 
 GX160 
 Power   2.2Kw   2.2Kw   2.2Kw   5.5PS 
 Noise    85 dB   85 dB   85 dB   85 dB 
 Speed   2800rpm/min   2800rpm/min   2800rpm/min   3600rpm/min 
 Dimension   600*390*400mm   680*370*400mm 
 Wight   45Kg   45Kg   47Kg   40Kg 
 Breathing air standard   EN12021   EN12021       EN12021 
 Configure   Standard   Standard   With PLC    Standard 

###

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Bx100 Three Phase Electric Scuba Diving Breathing 300bar Air Compressor     12v air compressorChina Bx100 Three Phase Electric Scuba Diving Breathing 300bar Air Compressor     12v air compressor
editor by czh 2022-11-29